Let’s learn about Martin Wing Pulleys with Dai Hong Phat through the following article!
1. About Dai Hong Phat Corp- Martin USA
– Dai Hong Phat Corp is a genuine Martin USA supplier in Vietnam. We provide genuine transmission shaft coupling solutions that meet international standards, helping to optimize the performance and durability of machinery systems.
– Martin Sprocket & Gear, founded in 1951 in the US, specializes in providing transmission solutions and industrial equipment. This brand stands out with its products on HRC couplings, pulleys, tapered bushings… becoming a prestigious name in the industry.
– Martin Wing Pulleys supplied by Dai Hong Phat are 100% genuine imports, with full CO/CQ, meeting international quality standards.
View more: Martin Conveyor Pulleys other
2. Features and Types of Martin Wing Pulleys
2.1. Key Features
– Manufacturer: Martin Sprocket & Gear / USA
– Self-Cleaning Design: The open-wing structure allows loose material to escape as the pulley rotates, reducing the accumulation of rocks, dirt, and debris between the conveyor belt and pulley.
– Pipe-End Design: Both ends of the pulley incorporate a steel pipe core, with the wings welded along a minimum length of 4 inches (101.6 mm) on both sides. This construction improves structural rigidity and reduces fatigue at welded connections.
– Controlled Wing Height: Martin limits the maximum wing height to 6 inches (152.4 mm), reducing the risk of wing deformation or folding under conveyor belt tension.
– Wear-Resistant Contact Bars: Contact bars have a minimum thickness ranging from 0.375 to 0.75 inches, depending on the pulley series, to accommodate different levels of abrasive wear.
– Multiple Shaft Mounting Options: Various hub and bushing systems are available to meet different shaft installation requirements.
– Wide Diameter Range: Standard Duty and Mine Duty models are available in nominal diameters from 8 to 60 inches, while Quarry Duty models range from 12 to 60 inches.
– Suitable for Non-Drive Applications: (conveyor pulleys) With their reinforced construction and material discharge capability, Martin Wing Pulleys are particularly suitable for non-drive positions, especially tail pulley applications in bulk material conveyor systems.
See more products:: Martin Engineered Class Pulleys
| FOR ANY INQUIRIES OR QUOTATION REQUESTS, PLEASE CONTACT: SALES DEPARTMENT HOTLINE: (+84) 0906 955 057 – EMAIL: INFO@DHP-CORP.COM.VN |
2.2. Types of Martin Wing Pulleys
Martin offers three main Wing Pulley series designed for different load capacities and operating conditions.

a. Standard Duty Wing Pulleys
– Designed for industrial conveyor systems operating under standard loading and abrasive conditions.
– Nominal diameter: 8–60 inches.
– Minimum contact bar dimensions: 0.375 × 1.25 inches.
– Minimum wing thickness: 0.25 inches.
– Minimum gusset thickness: 10 GA.
b. Mine Duty Wing Pulleys
– Features a heavier construction suitable for mining conveyors and abrasive bulk material handling applications.
– Nominal diameter: 8–60 inches.
– Minimum contact bar dimensions: 0.625 × 1.5 inches.
– Minimum wing thickness: 0.375 inches.
– Minimum gusset thickness: 0.25 inches.
c. Quarry Duty Wing Pulleys
– Engineered for demanding operating environments involving heavy loads and highly abrasive materials.
– Nominal diameter: 12–60 inches.
– Minimum contact bar dimensions: 0.75 × 2 inches.
– Minimum wing thickness: 0.375 inches.
– Minimum gusset thickness: 0.25 inches.
– Optional full-depth keyed bushings provide improved shaft engagement and help minimize axial movement.
In addition to standard configurations, selecting Martin Wing Pulleys requires consideration of pulley diameter, face width, shaft mounting arrangement, and actual operating conditions. Special dimensions or customized configurations should be confirmed with the manufacturer before ordering.
2.3. Construction and Operating Principle
– Construction: Martin Wing Pulleys consist of the following main components:
- Wings: Steel plates arranged around the pulley circumference, providing belt support while creating openings for material discharge.
- Contact Bars: Welded onto the wings to provide direct contact with the conveyor belt and resist abrasive wear.
- Pipe-End Construction: Reinforces the connections between the wings and pulley body, helping minimize structural deformation.
- Gussets: Reinforcing plates that increase wing rigidity under operating loads.
- Hub and Bushing System: Connects the pulley to the shaft, providing mechanical support, torque transmission where applicable, and proper positioning during operation.
– Operating Principle: As the conveyor belt moves over the pulley, the contact bars support the belt surface while the open spaces between the wings allow rocks, dust, and loose bulk materials to escape from the contact area. This self-cleaning mechanism helps prevent material from becoming trapped between the belt and pulley. As a result, it reduces the risk of localized belt wear, belt deformation, and tracking problems caused by material accumulation.
3. Applications of Martin Wing Pulleys
Martin Wing Pulleys are widely used in bulk material handling systems, particularly in conveyor positions where material buildup on the pulley surface is a concern.
- Mining Industry: Conveyor systems transporting ore, coal, rocks, and excavated materials.
- Cement Plants: Material handling systems for limestone, raw materials, and other bulk products.
- Quarries and Crushing Plants: Conveyors transporting crushed stone, sand, gravel, and highly abrasive materials.
- Building Materials Industry: Conveyor systems handling sand, aggregates, clinker, and production materials.
- Bulk Material Handling Systems: Tail pulley applications where preventing material entrapment between the belt and pulley is essential.
For heavy-load or highly abrasive environments, Mine Duty and Quarry Duty models should be evaluated based on operating requirements rather than pulley diameter alone.
4. Technical Specifications of Martin Wing Pulleys

| Catalogue Martin Wing Pulleys |
Hướng dẫn lắp đặt Martin Wing Pulleys |
|
Updating… |
The following table summarizes the general technical specifications of the three main Wing Pulley series according to the manufacturer’s catalogue.
| Specification | Standard Duty | Mine Duty | Quarry Duty |
|---|---|---|---|
| Nominal Diameter | 8–60 inches | 8–60 inches | 12–60 inches |
| Minimum Contact Bar Thickness | 9.53 mm | 15.88 mm | 19.05 mm |
| Minimum Contact Bar Width | 31.75 mm | 38.10 mm | 50.80 mm |
| Minimum Wing Thickness | 6.35 mm | 9.53 mm | 9.53 mm |
| Minimum Gusset Thickness | 10 GA | 6.35 mm | 6.35 mm |
| Maximum Wing Height | 152.4 mm | 152.4 mm | 152.4 mm |
| Core Construction | Pipe-End | Pipe-End | Pipe-End |
| Pulley Face | Crown / Optional Flat Face | Crown / Optional Flat Face | Crown / Optional Flat Face |
| Operating Conditions | Standard Duty | Heavy Duty | Extra Heavy Duty / High Abrasion |
Technical Notes:
- The listed diameters and dimensions are nominal specifications from the manufacturer’s catalogue. Not all combinations of diameter, face width, and hub configuration are necessarily available.
- Pulley diameter and face width must be selected according to the actual conveyor belt dimensions and system requirements.
- Maximum shaft bore, approximate weight, and product part number vary depending on the selected configuration.
- Rotational speed, radial load, and load-carrying capacity must be evaluated based on the conveyor system design. The catalogue does not specify a single universal rating applicable to all models.
Selection Guidelines
– When selecting Martin Wing Pulleys, engineers should consider conveyor belt width, pulley diameter, belt tension, shaft diameter, abrasive conditions, and the potential for material buildup.
– For systems requiring special dimensions, hub configurations, or mounting arrangements, technical drawings and operating parameters should be provided to verify manufacturing feasibility.
DAI HONG PHAT Corp supplies genuine Martin products and provides technical consultation to help customers select suitable pulley configurations for industrial conveyor systems.
5. Why choose Dai Hong Phat Corp?
– 100% genuine products imported directly from Martin USA.
– Protect customers from counterfeit goods and always provide full CO/CQ documents.
– Goods in stock, fast delivery nationwide 24/7.
– Free technical consultation and support for drawings, catalogs.
– Refined processing workshop to meet individual requirements.
—————-/—————–/—————–/—————–/—————–
– Hotline: +84906.955.057 | – Email: info@dhp-corp.com.vn
– Website: https://en.daihongphat.asia/ – https://khopnoitruc.com/ – https://ringfeder.com.vn/



